Application explain:
1. Setting preset point also can be in standby state, just change to set preset point mode, then type setting
preset point Numbers, confirm, the system can display "preset point has save".
2. About Numbers and name of the preset is different . Numbers is the only identity number for camera
storage , name is to set by the user.
3.2
．<
LEFT-RIGHT SCAN> setting
Move the cursor to the < LEFT-RIGHT SCAN >, press " IRIS +" to enter submenu. See
7:
Operation:
1
．
LEFT-RIGHT SCAN Number:
press“IRIS +”to enter and choose scan nubmer,control lever up and down
to choose scan number group1-4.
2.Title setting:
press“IRIS +”to edit title, control lever up and down to choose number,letter and other
characters.left and right to edit position and modify characters,press“IRIS +”to save after
edit then return.
3.Set start:
press“IRIS +”to set scan start, move PTZ to choose the start on the left, press“IRIS +”again to
confirm and return.
4. Set stop:
press“IRIS +”to set scan stop, move PTZ to choose the stop on the right, press“IRIS +”again to
confirm and return.
5
．
Set scan speed:
press“IRIS +”to set scan speed,control lever up and down to increase and decrease
speed number (1-64)
6.Run continousely:
press“IRIS +”to run current LEFT-RIGHT SCAN.
7.Delete current:
press“IRIS +”to delete current LEFT-RIGHT SCAN.Quick command of LEFT-RIGHT
SCAN: using No.98 preset point, (click “preset” botton, then input number “98”, click
”Enter”), the high speed dome will scan with the speed we have presetted
3.3.<CRUISE SCAN> setting
Move the cursor to the <CRUISE SCAN >, press " IRIS +" to enter submenu. See Picture 8:
Picture
Infrared Intelligent High Speed Dome Camera Operating Manual
12
Picture7<LEFT-RIGHT
SCAN>
:
setting
Picture8 < CRUISE
SCAN> setting: