Microlink 8890X Series Скачать руководство пользователя страница 16

3.6

<WAIT ACTION > setting

Move the cursor to <WAIT ACTION>

click “IRIS+” to enter submenu. The monitor shows as Picture12

<

Picture

operations

1

Wait time

click “IRIS+” to enter and set wait time

move joystick up or down to set wait time from 1 to 

                              255seconds

default time is 5s. for example it is 10s, then dome camera will run action if no 

                              operation in 10s.

2

Run action

click “IRIS+” to run one action. The actions include: cruise number 1-4

left- right soan 

                                  number 1-4

pattern number 1-4

1-220 preset and“close”

Move joystick up or down to 

                                  choose one of them. “close”means don’t run any actions. click “IRIS+” to save and return

3.7

PANTILT SETTING > setting

Move the cursor to <PAN TILT SETTING>

click “IRIS+” to enter submenu. The monitor shows as 

13

Detail operations

1

Auto-flip

click “IRIS+” to enter

move joystick up or down to choose open or close. If set “open”

dome 

                             camera will auto-flip 180 degree horizontally when pan tilt run to 90 degree vertically.

2

Auto focus mode

click “IRIS+” to enter

move joystick up or down to choose iris 

focus

close

all. 

                                               For example choose “iris”, then lens focus will not change when pan tilt move. And 
                                               the lens will auto-focus when operate iris. If choose “all”, then the lens will auto-focus 
                                               when any operations

3

Auto change speed

click “IRIS+” set whether the speed matches lens zoom. The bigger the zoon is,

                                                    the lower the speed is;

4

Manual control speed:

 click “IRIS+” to enter. Move joystick up or down to set 1-128 level. But must set 

                                                       <auto change speed> “close”, then this set works. Click “IRIS+” to save and return.

5

Setting north: 

dome camera can show east

south

west

north

northeast

southeast

northwest

                     

southwest. When the dome camera installation finished, the direction is incorrect, so 

                                      should set right direction of north. Click “IRIS+” to set and move joystick left or right ti 
                                      find the right north. Click “IRIS+” to save and return.

6

Go to zero position: 

click “IRIS+” to make pan tilt go to zero position.

Infrared Intelligent High Speed Dome Camera Operating Manual

15

Picture13<PANTILT>
setting:

  Picture 12<WAIT
 ACTION>setting:

Содержание 8890X Series

























Отзывы: