Infrared Intelligent High Speed Dome Camera Operating Manual
9
Operation instructions:
As the specific operation ways are different for Variety of controlling
equipments, please refer to the referring manual. IR high speed dome camera advise all users collocate
special controlling board, more using convenient. All the operation ways of this manual are taking
controlling board operating as example.
2.7
．
Boot initialization
Connect the video line and 485 controlling line to the monitor or DVR, ensuring that the connection is right then
catch 220V power to the power case of camera.
The ir high speed dome camera outpour signal to the screen and start searching varity of collocating information,
about after 10 seconds, the screen will show the list of the camera’s initialization, as picture 1.
At the mean while, the PTZ starts check up, down, left and right, after checking will show” system initialization
success”. Then it will standby
（
picture 2
）
or get back to the status as the last time off power.
When at standby status, it will show varieties of operating stuffs’ name on the left-up the screen, such as:
camera name, preset name, A to B scanning name, cruise scanning name and pattern scanning name.Current
date,time,surveillance direction,ptz location,lens multiple,temperature and so on. If no need to show,p.l.s
enter the menu<showing information setting> and set:close.
2.8
．
Basic operation
Frame: select surveillance area.user can operate the rocker up,down,left,right to move the holder to find the
surveillance direction. By operating the keyboard ”zoom+” or “zoom-“,zoom the image. Press”focus+” or
“focus-“,to adjust lens focus manually.
Picture1 checking
information when start up:
Picture 2 standby status: