© Microhard Systems Inc.
40
5.0 Network Topologies
Image 5-1: &F6 PTP Master Configuration View
Image 5-2: &F7 PTP Slave Configuration View
The screen captures on this page clearly show that most of the registers in both the Master
and the Slave have the same values.
(S105 is not visible in the Master view: its value is, and must be, 1.)
The differences are S101 (Operating Mode), S105 (Unit Address), and S140 (Destination
Address).
The nature of PTP is clear: The Master’s destination (S140) is 2 (the Unit Address (S105) of
the Slave); the Slave’s destination is the Master.
