© Microhard Systems Inc.
60
6.0 Configuration
&H1
Repeater Registration
When more than one Repeater exists in a network, the Unit Address of each
Repeater should be registered within
every
modem
in the network. The reason for
doing this is to enable the modems to create hopping patterns which will be
orthogonal to each other, thereby minimizing possible interference between network
segments.
Upon entering the AT&H1 command, the modem prompts as follows:
•
A
to add a Repeater (this is done by entering the Unit Address of
the Repeater)
•
R
to remove a Repeater
•
C
to clear all registered Repeaters.
Pressing the [Esc] key saves and exits the process.
&W
Write Configuration to Memory
&V
View Configuration
Displays S Register names and current values.
Stores active configuration into the modem’s non-volatile memory.
