Microhard Systems IPN4G, Руководство по эксплуатации

Страница: 122 / 193

© Microhard Systems Inc. 122
4.0 Configuration
Image 4-9-6: VPN > Cisco VPN Client
4.9.6 VPN > Cisco VPN Client
The IPn4G can be configured to create a connection with a Cisco VPN Server. Use the menu below to
setup the IPsec Gateway information and the User login details as required by the Cisco VPN Server.
Cisco VPN Client
This parameter is used to enable or disable the Cisco VPN Client. When
disabled the IPn4G will not attempt to create a connection with a Cisco
VPN Server. Values (selection)
Disable
Enable
IPSec Gateway
Enter the IPSec Gateway IP of the Cisco VPN Server that the IPn4G will
connect to.
Values (IP Address)
(no default)
IPSec ID
Enter the IPSec ID of the Cisco VPN Server that the IPn4G will connect to.
Values (characters)
(no default)
IPSec Secret
Enter the IPSec Secret of the Cisco VPN Server that the IPn4G will
connect to. Values (characters)
(no default)
IKE Authmode
This configuration parameter is used to set up the IKE (Internet Key
Exchange) protocol to use that set by the VPN Server. If Hybrid or
Certificate is used an additional parameter is shown to allow the upload of
the required certificate.
Values (selection)
PSK , Hybrid, Certificate
Username / Password
Specify a valid username and password as required by the Cisco VPN
Server.
Values (characters)
(no default)