Microhard Systems IPN4G, Руководство по эксплуатации

Страница: 30 / 193

© Microhard Systems Inc. 30
4.0 Configuration
POSIX TZ String
This displays the POSIX TZ String used by the unit as determined by
the timezone setting.
Values
(read only)
(varies)
NTP Server
Enter the IP Address or domain name of the desired NTP time server.
Values
(address)
pool.ntp.org
NTP Port
Enter the IP Address or domain name of the desired NTP time server.
Values
(port#)
123
Web Configuration Settings
The last section of the System Setting menu allows the configuration of the HTTP and HTTPS
Ports used for the web server of the WEBUI.
Image 4-1-4: System Settings > Web Configuration Settings
Web Protocol
Select the type of web protocol used for the WebUI configuration.
Select between HTTP (basic) and HTTPS (SSL, secure), or Both that
are running on the modem.
Values
(port#)
HTTP / HTTPS / BOTH
HTTP / HTTPS Port
The default web server ports for the web based configuration tools for
HTTP is TCP:80 and for HTTPS is TCP:443. If changes are required,
keep in mind it must be specified in a internet browser to access the
unit. (example: http://192.168.168.1:8080).
It may be required to configure Firewall rules to allow modified
port numbers that have been changed from the defaults.
Values
(port#)
HTTP: 80
HTTPS: 443
NTP Client Interval
By default the modem only synchronizes the time and date during
system boot up (default: 0), but it can be modified to synchronize at a
regular interval.
This process does consume data and should be set
accordingly.
Values
(seconds)
0