Microhard Systems IPN4G, Руководство по эксплуатации

Страница: 53 / 193

© Microhard Systems Inc. 53
4.0 Configuration
Defines accessibility of SNMPv3; If Read Only is selected, the
SNMPv3 user may only read information; if Read Write is
selected, the SNMPv3 user may read and write (set) variables.
V3 User Read Write Limit
Values (selection)
Read Only / Read Write
Defines SNMPv3 user’s authentication level:
NoAuthNoPriv: No authentication, no encryption.
AuthNoPriv:
Authentication, no encryption.
AuthPriv: Authentication, encryption. (Not supported)
V3 User Authentication Level
Values (selection)
NoAuthNoPriv
AuthNoPriv
AuthPriv (Not supported)
SNMPv3 user’s authentication password. Only valid when V3 User
Authentication Level set to AuthNoPriv or AuthPriv (Not supported).
V3 User Authentication Password
Values (string)
00000000
SNMPv3 user’s encryption password. Only valid when V3 User
Authentication Level set to AuthPriv (see above).
Authpriv is
currently not supported on the IPn4G(b).
V3 User Privacy Password
Values (string)
00000000
Select which version of trap will be sent should a failure or alarm
condition occur.
SNMP Trap Version
Values (string)
V1 Traps V2 Traps
V3 Traps V1&V2 Traps
V1&V2&V3 Traps
If enabled, an authentication failure trap will be generated upon
authentication failure.
Auth Failure Traps
Values (selection)
Disable / Enable
The community name which may receive traps.
Trap Community Name
Values (string)
TrapUser
Defines a host IP address where traps will be sent to (e.g. SNMP
management system PC IP address).
Trap Manage Host IP
Values (IP Address)
0.0.0.0