Microhard Systems IPN4G, Руководство по эксплуатации

Страница: 44 / 193

© Microhard Systems Inc. 44
4.0 Configuration
The name field is used to give the device a easily recognizable
name.
Name
Values (characters)
(no default)
Static IP Addresses (for DHCP)
In some applications it is important that specific devices always have a predetermined IP
address. This section allows for MAC Address binding to a IP Address, so that whenever the
device that has the specified MAC address, will always get the selected IP address. In this
situation, all attached (wired or wireless) devices can all be configured for DHCP, but still get a
known IP address.
Enter in the MAC address of the device to be bound to a set IP
address. Set the IP Address in the next field. Must use the
format: AB:CD:DF:12:34:D3. It is not case sensitive, but the
colons must be present.
MAC Address
Values (MAC Address)
(no default)
Enter the IP Address to be assign to the device specified by the
MAC address above.
IP Address
Values (IP Address)
(minutes)
Static Addresses
This section displays the IP address and MAC address currently assigned through the DCHP
service, that are bound by it’s MAC address. Also shown is the Name, and the ability to remove
the binding by clicking “Remove _______”.
Active DHCP Leases
This section displays the IP Addresses currently assigned through the DCHP service. Also
shown is the MAC Address, Name and Expiry time of the lease for reference.
Using the “Release All” button, all DHCP leases are released and any connected devices must
request new leases.
Image 4-2-5: Network > MAC Address Binding