microHAM © 2008 All rights reserved
These RECORDING/DIGITAL states are available:
RX focus on R1:
RADIO1 is selected (has RX Focus)
RX focus on R2:
RADIO2 is selected (has RX Focus)
Note: Split/Stereo is ignored
Functions stored in MK2R can be saved to and restored from a file. Users can share
configurations by exchanging files.
The control buttons are:
Get:
retrieve the selected Function from MK2R.
Get All:
retrieve all stored Functions from MK2R.
Store:
store the currently selected Function to MK2R.
Store All:
store all Functions defined in Router to MK2R.
Load From File:
loads a single Function into Router from a file
Single function files have a u1s extension
Load All From File: loads definitions for F1 through F8 into Router from a file
“All function” files have a usc extension
Save to File:
store the current Function to a u1s file.
Save All to File:
store all Function definitions to a usc file.
The default location for u1s and usc files is:
C:\Documents and Settings\All Users\Application Data\microHAM\cfg
TIP:
The Function Tab is an EDITOR, not an on-line configuration tool. All changes must be
written to MK2R with STORE or STORE ALL before they can be used.
Once the configuration has been written to MK2R, it can be selected by pressing the
appropriate F-key on the MK2R front panel or by selecting the desired function and pressing
APPLY on the Function tab.
61
