Page 21
Software Configuration
thermoIMAGER TIM Connect
These are the following options:
Manual
The lower and the upper border (Min/Max) can be determined individually.
</>
The software continuously defines the upper and the lower border based on the hottest and
coldest pixel in the image.
1
s
The mean value of all pixels in the image will be continuously calculated. Based on the
mean value one standard deviation (1 sigma) sets the limits of reference bar.
3
s
The mean value of all pixels in the image will be continuously calculated. Based on the
mean value three standard deviations (3 sigma) set the limits of reference bar.
OPT
With
OPT
a contrast optimization is achieved. This function allows an optimum contrast
between very low and very high temperatures.
i
Palette optimization (
OPT
) is not available for TIM-M1 and TIM-M05.
