MICRO-EPSILON Industrial Performance Unit, Руководство по эксплуатации

Страница: 13 / 24

Page 13
Installation and Assembly
Industrial Performance Unit
4.2.2 Interfaces
All connections for the controller are located on the front.
5
4 3 1 2
Fig. 8 Controller with connections
1 Ethernet socket, 3D sensor
2 Fieldbus
3 HDMI, connection for monitor
4 VGA, connection for monitor
5 Power supply
4.2.3 Supply Voltage (Power)
The power supply connection is a 4-pin plug connector.
Pin/Designation Comments
-
+
+
-
+
9 V ... 36 V DC
(nominal value 24 V, max.
power consumption 112 W)
-
0 V
Fig. 9 Pin assignment of the power supply connection, view: Plug on housing side
The operating voltage is protected against polarity reversal. Use only shielded lines or original cables from the accesso-
ries program for the power supply connection or the outputs.