MICRO-EPSILON Industrial Performance Unit, Руководство по эксплуатации

Страница: 6 / 24

Page 6
Safety
Industrial Performance Unit
If one of the following instances occurs, have the controller checked by service personnel:
- The power supply cable or plug is damaged.
- Liquid has got into the device.
- The controller was exposed to moisture.
- The controller is malfunctioning or not working as per the operating instructions.
- The controller was dropped and damaged.
- The controller has obvious signs of breakage.
Store the device within the storage temperature limits. The equipment should be stored in a con-
trolled environment.
CAUTION: Batteries may explode if they are used incorrectly. Only replace with the same or equiv-
alent types, as recommended by the manufacturer. Dispose of used batteries according to the
instructions of the manufacturer.
The controller should only be installed in an area with restricted access.
Store or save the operating instructions in a secure location.
1.3 Notes on CE Marking
The following apply for the Industrial Performance Unit:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant applicable harmo-
nized European standards (EN). The measuring system is designed for use in industrial environments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authorities according
to the EU Directives.
1.4 Notes on FCC Marking
The device meets the requirements of section 15 of the FCC rules.
1.5 Intended Use
- The Industrial Performance Unit is designed for use in industrial environments. It is used as a high-performance solu-
tion for 3D measuring tasks, with the connection to master control units being possible via conventional fieldbuses.
- The controller must only be operated within the limits specified in the technical data, see Chap. 2.4 .
- The controller must be used in such a way that no persons are endangered or machines and other material goods are
damaged in the event of malfunction or total failure of the controller.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.6 Proper Environment
- Protection class: IP40
The IP40 protection class is a specification that is limited to protection from dust and water. Oil, steam and emulsion
effects are not included in this protection class and must be evaluated separately.
- Temperature range
ƒ
Operation: 0 ... +50 °C
1
ƒ
Storage: -40 ... +85 °C
- Humidity: 20 ... 95% (non-condensing)
- Ambient pressure: Atmospheric pressure
1) Maximum permissible operating temperature at 0.7 m/s air flow