MICRO-EPSILON Industrial Performance Unit, Руководство по эксплуатации

Страница: 19 / 24

Page 19
Setting Up Fieldbus Operation
Industrial Performance Unit
Select
Active Devices > cifX0 > CH#0
(1).
Click on the
Add
button in the
Assigned Module / Firmware Files:
section (2).
Select the firmware. You can find the corresponding firmware file in the
Firmware
folder, which is located on the
D
drive. You can access it via the shortcut on the desktop of the user
Administrator
.
Click the
OK
button.
The path to the firmware is displayed in the
Assigned Module / Firmware Files:
section.
Click the
OK
or
Apply
button. A dialog with a prompt to restart the fieldbus card will appear. Confirm this by clicking
the
Yes
button.
Exit the cifX setup. The firmware has now been installed.
After restarting 3DInspect, the error message
Input/Output: Error fieldbus startup
should no longer be
displayed.
7.3 Operating Program
The program 3DInspect is available for operating the 3D sensor. It performs industrial 3D measuring tasks and is already
installed on the controller.