MICRO-EPSILON 4350127.347, Руководство по эксплуатации

Страница: 17 / 68

Page 17
Overview of Mechanical Components
thicknessCONTROL MTS 8202.LLT / 4350127.347
3.6 Human-Machine Interface
The components shown in the following sections are necessary for operating the system.
1 2 3 4 5
1 On/Off Switch
2 PC active / LED is green
3 Segment stop
4 Reset segment stop
5 Maintenance unit
Fig. 16 Operating elements at the measuring system/control cabinet
3.6.1 Signal Lamp
To visualize the operating states over long distances, the system features a signal
lamp(1), which is mounted on the control cabinet of the measuring system.
The signal lamp is in the control cabinet of the measuring system
, see Fig. 16 .
1
1 Signal Lamp
Fig. 17 Signal Lamp
Initializing: flashing green Ready: constant green
Measuring: constant yellow Calibrating: flashing yellow
Outside tolerance: red Constant error: flashing red
3.6.2 Emergency Stop
The measuring system does not have its own EMERGENCY stop button. The measuring
system uses the emergency stop signal from the production line. If an emergency STOP
signal is detected, the measuring system will terminate the thickness measurement. If the
emergency stop is canceled by production control, the sensor system travels back to the
home position.