MICRO-EPSILON 4350127.347, Руководство по эксплуатации

Страница: 46 / 68

Page 46
Installation and Initial Operation
thicknessCONTROL MTS 8202.LLT / 4350127.347
5.11.2 Check Measuring Device Capability, Method 1
Start measurement.
Change to menu
Extras > CGM Method 1
.
Based on a defined point in the cross-profile, 50 measurements are analyzed.
Fig. 58 Measurement of measuring device capability, Method 1
1 Result of the measuring device capability - valid after 50 points: Cgm / Cgk > 1.33
T(min): calculated tolerance
2 This diagram shows the measurement values. After each completed scan, a
measuring point is added.
3 Setpoint, upper and lower limit of production. Setpoint and threshold value are
used for calculation and diagrams.
4 Value to be checked [x]: This option defines the measuring point to be checked
[1 .. up to x] – this point is also shown as cursor.
5 This button starts and ends the test.
6
Shows the current state:
Test ongoing
Test completed, result not OK
Test completed , result OK
7 The result of the test is saved in an Excel file.
8 This diagram shows the current cross-profile.