MICRO-EPSILON 4350127.347, Руководство по эксплуатации

Страница: 39 / 68

Page 39
Installation and Initial Operation
thicknessCONTROL MTS 8202.LLT / 4350127.347
Fig. 41 Menu Move to position
Traversing to a measuring point is only reasonable after traversing measurement. When
the fix position has been confirmed with the green button
Go
the measurement carriage
traverses to the stated position. When the target position has been reached measure-
ment starts.
Via the button
in the view bar resp. via the menu
Measurement
>
Stop
the view
can be closed and the fix track mode can be ended. The measurement carriage travers-
es to its parking position.
Fig. 42 View Length profile - fix position
In the upper trend view measuring values of the last 60 seconds are displayed. Current
motor position and current thickness are displayed below. The virtual green LED
Posi-
tion reached
signalizes reaching the measurement position.
Gathered measurement data is saved in an ASCII file in the archive folder. The file con-
tains length, relative date [min] and the measuring value.
The file name is composed of:
FixPo Date/Time + Measurement position .txt
E.g. the file
FixPosition_20150916_153537_150mm.txt
was gathered in fix track
mode on 09/16/2015 at 3:35:37 PM at position 150 mm.
5.8.3 Views of Traversal Measurement
The single views are explained in the following paragraphs which enable measurement
data analysis of the traversal measurement. Selection of the single views is made via the
view bar.
Fig. 43 Elements of the view bar