Smart Swing 3
®
Installation Manual
SMART SWING 3 ®
Page 18 of 36
Step1.
Place a heavy item or your foot at the
desired full open position at approx. 90deg
open position.
Step 2
. Press Test/Learn button for 3 seconds
and release to begin the learning cycle.
Step3.
Incorporating a unique electronic stop,
the door will learn the full open position during
a one-time open/close cycle.
The door will open until it touches the object at
the desired full open position.
Back-check and latching position are
automatically calculated and do not need
setting (unless adjustment is required).
On the next activation, the door will open, slow
at back check, then stop at the learnt open
position.
The door will not hit the in-built fixed doorstop.
Note: The inbuilt fixed doorstop should
only act as a limiting device should the
door be pushed past its pre-set final open
position.
