Micanan PRO-GH, Инструкция по установке и эксплуатации

Страница: 3 / 45

3
Upon delivery of your MICANAN SYSTEMS heavy-duty gearhead jackshaft door operator, please inspect the unit carefully for
damage. Verify that operator horsepower, voltage, phase and amperage correspond to available power supply and door
application. Check that along with your operator you have received the following standard hardware.
1 x OPEN/CLOSE/STOP 3-button control station:
1 x #50 Drive chain package : 4’ (1.2m) or 5’ (1.5m) c/w #50 connecting link
1 x Drive Sprocket 50B12 or 50B15 c/w 2 set screws and keyway
1 x Door Sprocket: 50B23 x 1” or 1-1/4” bore, 2 set screws and
¼ ” x 1-1/4” keyway for sectional doors
or 50B40 x 1” or 1-1/4” bore, 2 set screws and ¼ ” x 1-1/4” keyway for rolling doors
Note: Sprocket size and bore may vary according to door
size and type, shaft size and drum diameter
1 x Chain keeper
1 x Keyring
4 x 3/8” bolt, hex nut, lock washer and flat washer
1 x pocket wheel hand chain
(2 x door height less 4’ (1.2m))
1 x Warning sign
1 set of Micanan photocells (
supplied when operator ordered
with interface module or logic control
VERIFICATION OF OPERATOR AND HARDWARE
IMPORTANT
FOR ANY QUESTIONS CONCERNING THE SAFETY OR OPERATION OF THIS
OPERATOR PLEASE CONTACT MICANAN SYSTEMS AT 1-877-888-1116
SAVE THESE INSTRUCTIONS