STRATA1
3 8 & 3 8 / 4 6 C O M B I
47
In addition to the ability of the boiler to be connected to traditional industry standard control systems,
MHS Boilers can supply a range of dedicated matched controls which not only simplify the selection of
controls but in addition enhance the efficiency of the boiler and comfort conditions within the building.
combination pump and underfloor system
mixing valve control
MRO3 module: For single boiler applications. A small and neat wall mounted control box which allows
the boiler to control two different heating circuits.
Circuit 1
- A variable temperature circuit with pump and mixing valve (240v) for use with underfloor
coils where the maximum flow temperature = 55°C.
Circuit 2
- A pumped heating circuit (eg radiators) where the flow temperature is direct-on-boiler
weather compensated variable. The MRO3 has the facility to connect an RE2132 modulating
room unit to provide modulating room temperature and time control over the underfloor
circuit. A second RE2132 unit may be connected directly to the boiler to control
Circuit No.2.
modulating room temperature control
RE2132 room unit: A compact digital room temperature control that will modulate boiler power
according to room temperature requirements.
key features
●
In-built optimising time control and temperature sensor.
●
Three temperature levels including frost protection.
●
Holiday programmable.
●
Can be used as a remote control for parallel shift of compensation slope.
●
Self learning.
●
Can be connected to an individual boiler, on MR03 (underfloor) control or a KKM2
sequence controller.
●
QAW44 an additional tamper proof sensor can be wired to the RE2132 to allow sensing of remote
areas away from RE2132.
optional matched controls
optional matched controls