Vega EMS-1 Operating Manual
Page 16
4.5 EGT / CHT Setup (Thermocouple Setup)
EGT / CHT Channels:
Select the number of EGT or CHT channels you want to use. Choices are from 1 to 4 (1 to 12 if using the optional
RDAC) . The temperature display will configure itself to make best possible use of the available display size. Please note
that the minimum number of EGT & CHT channels that can be displayed is 1 and the maximum number of EGT and CHT
channels that can be displayed is 4 (12 if using the optional RDAC).
Display:
A selection between
“HIGHEST”
or
“SCANNING”
can be selected. If
“HIGHEST“
is selected then the current highest
thermocouple temperature is displayed. If
“SCANNING”
is selected then the unit will cycle through each thermocouple at
a one second interval.
Display Max:
Select the maximum temperature that you want the EGT/CHT bargraph to show. This can give you increased display
resolution.
Display Min:
Select the minimum temperature that you want the EGT/CHT bargraph to show. This can give you increased display
resolution.
High Alarm:
This enables or disables the EGT/CHT high alarm.
High Alarm:
Enter the temperature threshold for when the high alarm must be activated. Any temperature above this value will activate
the alarm.
