MG MG 360 2016, Руководство пользователя, Страница: 42 / 285

Instruments and Controls
Follow Me Home (Headlamp off delay)
After stopping the vehicle, turn off the ignition switch and
pull out of the ignition key, pull the stalk switch fully toward
the steering wheel (Figure 4) within approximate 1 minute
and then release it, the headlamp low beam will come on
for about 30 seconds.
Turn on the ignition switch or pull the stalk switch (Figure
4) fully again to cancel this function.
Daytime Running Lamp
*
When the ignition switch is in Position 2, the daytime
running lamp will be automatically turned on; and when
the width lamps are turned on, the daytime running lamp
will extinguish automatically.
Hazard Warning Lamp
Press the hazard warning lamp button to turn on the hazard
warning lamp. Meanwhile, all of the turning signal lamps
and direction indicator lamps will flash together. Press the
button again to turn off the hazard warning lamp. All the
turning signal lamps and direction indicator lamps will stop
flashing.
28