MG MG 360 2016, Руководство пользователя, Страница: 41 / 285

Instruments and Controls
Direction Indicator/High Beam Stalk Switch
Take care not to dazzle oncoming vehicles
when the headlamp high/low beam switching
is applied.
2
3
1
4
Turning Signal Lamps
Move the stalk switch down to indicate a LEFT turn (
Figure 1), or up to indicate a RIGHT turn (Figure 2). The
corresponding GREEN indicator lamp in the instrument
pack will flash simultaneously when the turning signal
lamps are functioning. After the steering wheel returns to
its original position, the stalk switch will be automatically
reset, and the turning signal lamp goes off.
But if the
steering wheel turns at a small angle, it requires to manually
reset the stalk switch to turn off the turning signal lamp. If
the stalk switch is moved at a small angle, it will be reset
immediately. At the moment, the direction indicator lamp
flashes three times and then automatically goes off.
Headlamp High/Low Beam Switching
When the ignition switch is in Position 2 and the headlamps
illuminate, push the stalk switch forward (Figure 3), then
the headlamp high beam will be turned on and the blue
high beam indicator in the instrument pack illuminates. At
the moment, push the stalk switch forward again to switch
to the headlamp low beam.
High Beam Flash
With the ignition switch in Position 1 or 2, pull the stalk
switch (Figure 4) fully towards the steering wheel and then
release it repeatedly, the headlamp high beam will flash.
27
1