Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 67
•
Press the “START/YES” key, you will see:
•
Press the “Stop No” key if the network does not use DHCP or press
the “START/YES” key if the network does use DHCP. If you press
the ““START/YES” “ key you will be prompted to Restart the
system, if you press the “Stop No” key you will see:
•
Enter the 4 sets of numbers of the IP address, one set at a time. After
each octet press the “START/YES” key. Do not enter an IP address
of a machine that is already on the network. When you have entered
in the entire IP address, you will see:
•
Enter the 4 sets of numbers of the subnet. Pressing “START/YES”
after each set. You will then see:
