Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 10
Removing Packing Restraints
The Scribe SA Standalone ships with a picker arm restraint to reduce the
possibility of damage in transit. This restraint must be removed before
operation or power-on. Gently remove the zip tie and foam from around the
transfer arm. Save the foam tube, as you will need to return it to its place
when transporting the unit in the future.
Input Bin and Output Spindle
The input bins and the output spindle serve as the containers to store from
250 discs up to 600 discs depending on printer option. The input bins
become output bins once the output spindle is full.
System Startup
Before duplicating can begin it is necessary to review a few details.
•
Verify that the voltage selector switch is set correctly. It is located
between the two power receptacles. The Scribe SA Standalone supports
both 115 VAC and 230 VAC at 50 ~ 60 Hz. Please confirm that the
appropriate voltage (115 VAC for North America) has been selected.
•
Next, plug one end of the supplied power cord into the receptacle at the
rear of the unit.
0
CAUTION
Always use properly grounded receptacles or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.
