Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 31
•
At this point the automated arm will pick a disc up from the input area
and place the CD so that it stops just above the printer tray. Check the
alignment of the printer and adjust the printer accordingly. After the
disc has been placed you will see the following screen:
•
Press the “Start/Yes” key. The disc will be unloaded from the printer
tray and put onto the output spindle. You will be returned to the start of
the test, repeat the process if further alignment is required.
Note:
When performing this test, the printer tray will eject
automatically. You do not need to eject the printer tray.
When the test is completed, the tray will close.
