Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 41
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the
Multiple Images
feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
•
Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
•
Press the “Start/Yes” key. The screen will now read:
The Scribe SA Standalone defaults to the first image (1). For the
purposes of this example, press the “1” key to select this image,
followed by the “Start/Yes” key. The screen will now read:
