Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 14
•
Press the “1” key on the keypad. Something similar to the following will be
displayed on the screen in sequence:
•
As indicated by the red square, this is the version information of the
firmware currently installed on the Scribe SA Standalone.
•
This displays the image size on the internal hard disk, time and date.
•
This displays the
Verify After
status of the Scribe SA Standalone.
The
Verify After
function will verify a copied disc against the master
disc immediately after it has been copied.
