background image

 

 

Scribe SA Standalone Series Operator’s Guide

 

Document Revision: 03/24/06

 

 

 

Page 5

 

 

End User License Agreement 

 

 

 

You have acquired a device (“Scribe SA Standalone Series CD-R/RW duplicator”) that includes software licensed by MF 
DIGITAL from Microsoft Licensing Inc. or its affiliates (“MS”).  Those installed software products of MS origin, as well as 
associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by 
international intellectual property laws and treaties. The SOFTWARE is licensed, not sold.  All rights reserved. 

 

 

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THIS DEVICE OR 
COPY THE SOFTWARE.  INSTEAD, PROMPTLY CONTACT MF DIGITAL FOR INSTRUCTIONS ON RETURN OF 
THE UNUSED DEVICE (S) FOR A REFUND.  

ANY USE OF THE SOFTWARE, INCLUDING BUT NOT 

LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR 
RATIFICATION OF ANY PREVIOUS CONSENT

.) 

 

GRANT OF SOFTWARE LICENSE

.  This EULA grants you the following license:  

 

You may use the SOFTWARE only on the DEVICE. 

 

NOT FAULT TOLERANT

. THE SOFTWARE IS NOT FAULT TOLERANT.  MF DIGITAL HAS 

INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS 
RELIED UPON MF DIGITAL TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE 
SOFTWARE IS SUITABLE FOR SUCH USE.  

 

NO WARRANTIES FOR THE SOFTWARE.  

THE SOFTWARE is provided “AS IS” and with all faults.  

THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND 
EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU.  ALSO, THERE IS NO 
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR 
AGAINST INFRINGEMENT

.  IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE 

DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT 
BINDING ON, MS.  

 

Note on Java Support

.  The SOFTWARE may contain support for programs written in Java.  Java technology is 

not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in 
hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft 
navigation or communication systems, air traffic control, direct life-support machines, or weapons systems, in 
which the failure of Java technology could lead directly to death, personal injury, or severe physical or 
environmental damage.  Sun Microsystems. has contractually obligated MS to make this disclaimer.  

 

 

No Liability for Certain Damages.  

EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO 

LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES 
ARISING FROM OR IN CONNECTION WITH THE USE OR PURPOSE.  IN NO EVENT SHALL MS 
BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO-HUNDRED FIFTY DOLLARS (U.S. 
$250.00).

 

 

Limitations on Reverse Engineering, De-compilation, and Disassembly.  

You may not reverse engineer, de-

compile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted 
by applicable law notwithstanding the limitation.  

 

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS

.  You may permanently transfer rights 

under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this 
EULA.  If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.   

 

EXPORT RESTRICTIONS

.  You acknowledge that SOFTWARE is of US-origin.  You agree to comply with 

all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export 
Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and 
other governments.  For additional information on exporting the SOFTWARE, see 
http://www.microsoft.com/exporting/. 

Содержание Scribe SA Standalone Series









































































Отзывы: