Meyra 2.263, Руководство по эксплуатации

Страница: 42 / 76

42
OPTIONS
Options are not a part of the standard
scope of supply.
☞
Note:
Options not approved by us can
cause fault conditions.
– No liability.
Lap belt
The lap seatbelt serves as a safety
seatbelt for the person sitting on
SCOOTER .
– Additional stabilisation of the sit-
ting position.
– Prevents the user from slipping for-
wards out of the seat (e.g. during
abrupt braking).
The lap seatbelt is screwed onto the
seat at the bottom.
☞
Note:
The subsequent assembly of a lap
seatbelt must be carried out by an
authorised workshop!
!
Attention:
The lap seatbelt is not a part of the
securing system for the
SCOOTER
or the person sitting in the wheel-
chair, during the transport in a dis-
abled person transport vehicle.
Strapping on the lap belt with
lock
▲
Pull both belt halves to the front
and slide the catch halves together
so that they latch together. Then
carry out a pull test.
Pull both belt halves to the front and
slide the catch halves together so that
they latch.
Putting on the lap seatbelt with
velcro fastener
▲
Guide the belt end with the Velcro
strip through the clasp and then
close the Velcro fastener. Then car-
ry out a pull test.
!
Attention:
Make sure that no objects are
trapped between belt and the
body! – Thus you avoid painful
pressure points
Adjustment of belt length
☞
Note:
The lap seatbelt should not be too
tight.