Meyra 2.263, Руководство по эксплуатации

Страница: 34 / 76

2
3
1
34
Reassembly of SCOOTER-compo-
nents
☞
Before assembly a visual check of
the single components should be
conducted for completeness and
damages.
Here the following is to be observed
closely:
– The brackets to receive the drive
may not be bent.
– The locking bolt to attach the as-
sembled front panel and drive are
still on the safety wire.
– The connection cables are not dam-
aged.
Attaching the drive unit
First put the drive into drive mode.
1. Lift the front chassis at the seat tube
(1) and at the same time swivel the
drive forward so that the support
tubes of the drive glide onto the
brackets of the front chassis (2).
2. Let the drive slide down over the
seat tube as far as possible (3).