Meyra 2.263, Руководство по эксплуатации

Страница: 56 / 76

2
1
56
Dismantling the steering wheels
Before replacement or repairs the
protection cap has to be pulled off of
the hexagon nut (1), then the steering
wheel is to be disassembled by remov-
ing the hexagon nut (1).
☞
Note:
☞
After attaching the steering wheel
the hexagon nut (1) is to be screwed
on tightly again.
Afterwards press the protection
cap back onto the hexagon nut
(1).
☞
The valve points outwards.
Changing the tyres
!
Attention:
The screws (2) at the outer edge of
the wheel rim hold together the
rim halves and must not be loos-
ened until the tyre is fully defl at-
ed.
– Danger of injury!
To exchange the tyre defl ate it com-
pletely then remove the nuts (2) of
the rim and separate the rim halves.
☞
Note:
The nuts are located on the oppo-
site side to the valve.