manualshive.com logo in svg

Metrotech 480B SFL 2Dx, Руководство по эксплуатации

Поделиться
Скачать
Metrotech 480B SFL 2Dx Скачать руководство пользователя страница 55

 

52

WARRANTY 

 

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY 
WARRANTY OF MERCHANTABILITY, BEYOND THOSE STATED HEREIN. 

 

Metrotech warrants it is equipment to be free from defects in workmanship and material 
under normal and proper use and service for one year from date of purchase by original user.  
Metrotech assumes no obligation to repair or replace equipment which has been altered or 
repaired by other than a Metrotech-approved procedure, been subject to misuse, 
misapplication, improper maintenance, negligence, or accident; has had it is serial number or 
any part here of altered, defaced ore removed; or been used with parts other than those 
approved by Metrotech.  Warranty does not include batteries.  Expendable items such as fuses 
and lamps are excluded. 
 
Any detection product proved defective under this warranty will be repaired or replaced free 
or charge at the Metrotech Corporation factory or approved Metrotech repair station.  The 
equipment should be returned to our factory by prepaid transportation after requesting and 
receiving return authorization from our Service Department. 
 
Metrotech’s obligations are limited to repair or replacement of broken or defective parts, 
which have not been abused, misused, altered, or accidentally damaged, or at the option of 
Metrotech, to refund of the purchase price.  Metrotech assumes no liability for removal or 
installation costs, consequential damages, or contingent expenses of any other nature. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Part #: 11207 
Price: $10.00 US 

Содержание 480B SFL 2Dx
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды