Overview
785 DMP Titrino
3
Rear view of instrument:
7
RS232 interfaces
2 separate interfaces for the connection of printer, balance, and com-
puter
8
Remote lines
(input/output)
for the connection of the Remote Box, Sample Changers, robots etc.
9
Connection of electrodes and temperature sensor
•
2 high-impedance measuring inputs for pH and U measurements.
They can either be used separately or for differential potentiometry,
see page 158.
Important: If you work with both measuring inputs in the same ves-
sel, the same reference electrode must be used.
•
1 measuring input for polarized electrodes, e.g. KF electrode
•
1 measuring input for PT100 or Pt1000 temperature sensor
10
Connection for separate keypad
11
Connection for power cable
With power supplies where the voltage is subject to severe HF distur-
bances, the Titrino should be operated via an additional power filter,
e.g. Metrohm 615 model.
12
Connection for stirrer
728 Magnetic Stirrer, 722 Rod Stirrer, 703 or 727 Ti Stand
Supply voltage: 10 VDC (I
≤
200 mA)
13
Rating plate
with fabrication, series and instrument number
