METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial
User Manual
76-02-082 Rev J
27 of 140
4.3 Logging onto WCM
The initial access to the WCM must use a terminal connected to the terminal port.
The WCM has a password protected, menu driven user interface. When a management
session is connected to the WCM, the welcome banner will be displayed as shown:
Metrodata WCM1100:
Local connection to “”
Password (‘view’ to view only ) :
or
Metrodata WCM3100:
Local connection to “”
Password (‘view’ to view only ) :
or
Metrodata WCM-Serial: Local connection to “”
Password (‘view’ to view only ) :
At the prompt, enter the password to gain access to the WCM. The default password is
the product name, ie
“wcm1100”, “wcm3100” or “wcm-serial”. For security, the password
is obscured with an asterisk (*) being displayed for each character typed. An incorrect
password will lead to the welcome banner being redisplayed. A correct password will lead
onto the main set up menu as shown below:
Metrodata WCM3100 "" Alarms: Major
MAIN SET-UP
Global status <display>
alarm eXtension <menu>
Operational Modes <menu>
Port set-up <menu>
V.24 set-up <menu>
Management Entity <menu>
System <menu>
Update EEPROM
circuit/flow Tests <menu>
performance Data <menu>
First CAPITAL - select item
<escape> - exit menu
