Metro Therm METROAIR AQUA HPM, Руководство пользователя

Страница: 29 / 44

29
E49: Screen saver
Here you can select the screen saver:
1: Blank display. A point flashes to show that the system is powered.
2: Water temperature T7 (water tank, top) is displayed.
3: The time is displayed.
Options: 1-3
Factory setting: 2
E50: Internal clock hours
Here the hours of the clock are set.
Options: 0-23 hours
Factory setting: 0 hours
E51: Internal clock minutes
Here the minutes of the clock are set.
Options: 0-59 minutes
Factory setting: 0 minutes
E52: Low tariff period ON/OFF
Value of 0 (OFF): The electrical heater and the heat pump will run according to need and prefer-
ences.
Value of 1 (ON): The electrical heater relay and the heat pump will only run during to the speci-
fied period of time with the start according to menu item
E53 and end according to menu item
E54 .
Please note, if PV mode is selected ( E15=2 ) this allows the auxilary electrical heater and the
heat pump to run outside the low tariff period if PV power is available.
Options: 0-1
Factory setting: 0
E53: Low tariff period start time - working days
The start time of a low electricity tariff period during working days (day 1-5) is set here.
Options: 0-23 hours
Factory setting: 1 hour
E54: Low tariff period stop time - working days
The stop time of a low electricity tariff period during working days (day 1-5) is set here.
Options: 0-23 hours
Factory setting: 6 hours
E55: Low tariff period start time - weekends
The start time of a low electricity tariff period during weekends (day 6-7) is set here.
Options: 0-23 hours
Factory setting: 1 hour
E56: Low tariff period stop time – weekends
The stop time of a low electricity tariff period during weekends (day 6-7) is set here.