14
Cleaning
It is not permitted to use any solvents to clean dust and dirt from the meter. Only a damp
cleaning cloth is suitable for this purpose.
15
Transport and storage
The MQMe Quantometer and all its accessories should be stored in their original
packaging. Ensure that the meter is secured to prevent it rotating or slipping. Take special
care when loading and transporting the meter to the installation location.
Some important requirements for transport and storage are:
•
Protective film is fitted to both flanges on the meter.
•
The oil pump (if present) is not filled during transport.
•
Protect the meter against rain and moisture.
•
Protect the meter against mechanical impact or shocks.
•
Carefully check the following when unpacking the meter:
●
The packing list to ensure that all of the listed parts are present
●
Every individual part for damage
16
Disposal
Particular care was taken during the design of the MQMe Quantometer to ensure that as
few composite materials were used as possible. This design concept enables a high degree
of recycling. Therefore, we are also willing to take back the device / product and dispose of
it professionally.
All products marked with this symbol are electrical and electronic devices
(Directive 2012/19/EU of the European Parliament and of the Council of 4
July 2012 on waste electrical and electronic equipment (WEEE)) and must
not be disposed of together with unsorted household waste. Instead, to
protect human health and the environment, you must take your waste
equipment to an officially designated collection point for the recycling of
waste electrical and electronic equipment. Proper disposal and recycling
help to avert potentially harmful consequences for the environment and
people.
For further information on the location and conditions of such collection
points, please contact the installer or local authorities.
National regulations
The national regulations and disposal guidelines must be observed for all disposal
measures.
33