Metos SP-30HA-W, Инструкция по эксплуатации

Страница: 6 / 36

6
Metos Marine Mixer SP-30HA, SP-40HA 15.05.2015
The mixer should be plugged into a switched socket which isolates all poles and has
a minimum contact clearance of 3mm and located close to the mixer for use in an
emergency and to facilitate servicing.
The machine must be incorporated into a potential equalization system.
The leakage current for this appliance is no greater than 1 mA/KW.
If the electrical supply cable to the machine becomes damaged, it must be replaced
by a specification or higher and suitable for the Mixer’s motor load.
The ground wire is fixed to the machine and this connection must be kept intact.
CAUTION: The mixer MUST be grounded.
• The minimum requirement for all electrical equipment is correct operation between
air temperature of +5°C and +40°C.
• Electrical equipment is capable of operating correctly when the relative humidity does
not exceeding 95% at a maximum temperature of +40°C.
• Electrical equipment is capable of operating correctly at altitude up to 1000m.
• Electrical equipment is designed to withstand to protected against the effects of
transportation, and storage temperature within a range of -25°C to +55°C and
for short
periods not exceeding 24h at up to +70 °C .
OPERATING INSTRUCTIONS
Before using the mixer
Before using the mixer, ensure that all users are familiar with the correct operation of
the machine. In particular, care should be taken to ensure that the bowl and mixing tools
are correctly fitted and that the bowl guard is in position prior to starting the machine.
Safety at work
NEVER place your hand or any kitchen utensil in the bowl whilst the mixer is
in operation.
• Keep hands, hair and clothing away from moving parts.
• Isolate the machine from the electrical supply by removing the plug from the
socket before cleaning, servicing or adjusting any parts or attachments.
• Do not use the machine with any cover or guard removed.
• Certain operator notice advising about the safe use of this mixer is attached to
the machine.