Metos SP-30HA-W, Инструкция по эксплуатации

Страница: 10 / 36

10
Metos Marine Mixer SP-30HA, SP-40HA 15.05.2015
Untimed operation
If you wish to manually control a mix, select the untimed mode by moving the Timer
Knob anti-clockwise until it stops.
CAPACITY
Please refer to Page 15. The table shows the recommended capacities of finished
weights of regular mixes. Although the machine may be capable of mixing larger
quantities, it will lead to excessive and premature wear and possible failure. Overlo-
ading also results in lengthy processes and unsatisfactory results.
NOTE: Reduce batch size by 10%, if chilled flour, water below 20°C, ice, or high gluten
flour is being used. ice, or high ten flour is being used.
NOTE: Overloading or not following the chart will damage the mixer and void the
warranty.
SPEED SELECTION
Before changing speeds, the mixer must always be STOPPED first.
The necessary speed can then be selected before restarting the machine by pressing
the Green Start Button.
The speed selected depends largely on the quantity and consistency of the product.
It is recommended that mixing is always started at the lowest speed and progressi-
vely increased to the desired setting. In an emergency situation always use the Red
Emergency Stop Button to stop the machine. Table shows the recommended speeds
for the range of tools.
IMPORTANT: When mixing products always follow the recommended
agitator and speed setting.
The mixer is equipped with a motor overload protection. If the mixer shuts off during
operation, reduce the batch size and wait 2 minutes. Press the stop button then
press the start button.
For heavier loads, the mixer should not run longer than 15 minutes without pausing
for a cool down period of at last 15 minutes or more before resuming mixer. For
lighter loads the mixer should not run longer than 30 minutes without pausing for a
cool down period of at last 30 minutes or more before resuming mixer.