Metos SP-30HA-W, Инструкция по эксплуатации

Страница: 11 / 36

15.05.2015
11
Metos Marine Mixer SP-30HA, SP-40HA
ATTACHMENTS
The ranges of attachments that can be operated from the
Attachment Hub are listed below. When using an attachment,
lubricate the Drive Stud (D) using a food quality grease or oil. To
fix to the mixer refer to Figure 4. Release the Thumbscrew (G)
and slide the shaft of the attachment into the hub ensuring that
the Drive Stud (D) engages in the socket within the hub. Rotate
the attachment to line up the Location Peg (E) with its mating
hole in the hub and push firmly home. Tighten thumbscrew to
secure. Fig.4
CAUTION: Only fit attachments when the mixer is stationary and never when it
is operating. Do not use attachments when mixing.
The recommended speed range for some of the attachments available is shown in
table below.
Recommended speed
1
st
gear 2
nd
gear 3
rd
gear
V99S Veg. Prep.
VH-12 Mincer
V99S
Vegetable Preparation With
a range of 8 plates to slice,
grate or shred all types of
vegetable and fruit from nuts
and cabbage to carrots and
cheese.
VH-12 Mincer
A no.12 mincing attachment
which works wonders with
meat, fish and vegetables
alike.
NOTE: Make sure the bowl is up and the bowl guard is closed, otherwise the mixer
will not function.
NOTE: If you still don’t understand or have any doubt of operation, please
don’t use the machine and contact the local representative.
NOISE TEST REPORT
The average A-weighted sound pressure level
”Uncertainly, K in decibels: 4.0 dB (A) according to EN ISO 4871”
SP-30HA SP-40HA
Noise level 64,4 dB 61,9 dB
IP CLASSIFICATION
IP 54