Metos SP-30HA-W, Инструкция по эксплуатации

Страница: 14 / 36

14
Metos Marine Mixer SP-30HA, SP-40HA 15.05.2015
TROUBLESHOOTING
FAULT CHECK POSSIBLE REASON AND ACTION REQUIRED
No power to mixer 1. Check plug socket
2. Check wiring in plug
3. Check fuse in plug
4. Check or change cable
5. Check microswitch
6. Check circuit breaker
over load or short
1. Mixer not plugged into a live socket or not
switched on
2. Plug incorrectly wired – rewire correctly
3. Possible faulty fuse – replace fuse
4. Cable damaged or split – replace cable
5. Limit switch damaged or faulty – replace
switch
6. Circuit breaker shut off or constantly short –
reset or replace the circuit breaker (automatically
reset).
Mixer falls to
operate 1. Check bowl guard/lift
2. Check timer position
3. Check transmission belt
4. Check gear change
lever
1. Machine will not operate with guards open
2. Mixer will operate on timer or manual position
only.
3. Belt damaged or broken-replace belt
4. Machine will not operate if out of gear-put in
gear
Mixer becomes
noisy 1. Check bowl and tools
2. Check work surface
3. Check bearing for wear
4. Check gearbox
5. Check planetary unit
1. Ensure that bowl and tool are correctly seated.
2. Uneven surfaces create excessive resonance.
3. Worn bearings – replace bearings
4. Damaged or faulty gearbox – replace gearbox
5. Reapply high-pressure grease thought grease
fitting. (Please refer to MIANTENANCE)
Mixer loses power 1. Check capacity
2. Check transmission
gear
3.heck shaft bias
1. Overloading of bowl – reduce load
2. Gear damaged or worn – replace belt
3. Damaged or faulty gearbox– replace shaft bias
Motor overheating 1. Check capacity/speed
2. Check supply voltage
1. Refer to capacity tables for details
2. Voltage should correspond to rating plate
Oil on planetary
shaft Check oil seal Worn oil seal – change oil seal
Mixing tools stuck
planetary shaft Check planetary shaft
bent, unclean or rusted.
Planetary shaft twisted or bent – please change
planetary shaft.
Planetary shaft rusted – please use descaler for
derusting.
Turn planetary shaft anti-clockwise to meet
square groove, gently knock down mixing tools.