Metos SP-30HA-W, Инструкция по эксплуатации

Страница: 12 / 36

12
Metos Marine Mixer SP-30HA, SP-40HA 15.05.2015
CLEANING INSTRUCTIONS
Care of your mixer
CAUTION: ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER FROM
THE MIXER BEFORE CLEANING.
The mixer is designed for simple maintenance carried out by operators. It may be
necessary from time to time to apply a little Vaseline and oil to the rods on which the
bowl cradle slides. If so, use a little food quality lubricant, ensuring that there is no
excess oil that could contaminate the food mix.
Clean the mixer thoroughly after use. After isolating the machine from the electricity
supply, the body should be wiped down with a damp cloth. Do not spray the machine
with or immerse it in water. Do not forget to clean the rear of the machine and do not
allow the rear vents to become blocked as this may result in overheating.
Pay particular attention to the bowl pins and any surrounding areas of the cradle to
prevent the accumulation of mix, as this could prevent correct location of the bowl. For
the same reason ensure that the beater shaft and each of the sockets on the tools are
cleaned thoroughly. The bowl and tools should be washed in hot soapy water, rinsed
and dried before being put into storage. Do not wash the agitators in a dishwasher,
as the polished finish will be adversely affected by the dishwashing chemicals.
MAINTENANCE
It is recommended that any servicing or maintenance work must be carried out by a
trained technician or electrician.
CAUTION: ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER FROM
THE MIXER BEFORE DOING MAINTENANCE.
Maintenance
Regular maintenance is necessary on all machines if they are to remain in good wor-
king condition. It is strongly recommended that all maintenance must be carried out
by trained technicians from an appointed distributor.
On regular basis
Clean the machine thoroughly after use and lubricate the rods with Vaseline or lubri-
cation oil which the bowl cradle slides. After cleaning the beater shaft, please wipe
and lightly lubricate the beater shaft with Vaseline to prevent rusting. (SEE CARE ON
YOUR MIXER)