Meteor Communications Corporation MCC-545C, Эксплуатация и обслуживание, Страница: 85 / 88

OPERATIONS 4-49
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
*SYNTH {,action} Display/set status of frequency synthesizer. This
command is applicable only to the MCC-545C/S. action =
ON – enable
OFF – disable
T
Show current date/time.
TEST Send test transmission and return updated statistics (uses
same format as
STAT command).
TIME {,hh:mm:ss} Set system time. If no parameters are specified, show
current time. If parameters are given, DOS calendar will
also be updated. hh – hours
mm – minutes
ss – seconds
0 – 23
0 – 59
0 – 59
†TIMEZONE {,UTC,sys} Set local time zone offsets from UTC time (GMT) and
system time. UTC = offset
from GMT
sys = offset from
system time -12 – 12
-12 – 12
TRACE ,action,data stream Diagnostic command used to enable/disable detailed
analysis of the specified data stream. action =
ON – enable
OFF – disable
date stream = RF,
GPS, MSC,
RTCM
*TX LIMIT {,count} Set limit on number of transmissions allowed in a 15-
minute period (in minutes). count = # of
transmissions
period = minute