Meteor Communications Corporation MCC-545C, Эксплуатация и обслуживание, Страница: 44 / 88

OPERATIONS 4-8
MCC-545C PACKET DATA RADIO
12/2000
The hourly report can be re-enabled by entering the command:
HOURLIES,ON
4.2.6 Scheduling MCC-545C Events
The SCHED command allows you to schedule automated command "events". An "event" simply
consists of giving one or more commands a trigger time. When the MCC-545C's real-time clock
reaches the trigger time, the scheduler invokes the command as though you had entered it from
the MCC-545C's operator terminal.
Two different types of time trigger options are provided for command scheduling: INTERVAL
and TIME. The INTERVAL trigger allows you to schedule a command to be invoked at periodic
intervals within a 24-hour time period; the TIME trigger allows you to schedule a command to
be invoked only once at a specified point within a 24 hour time period. The command schedule
list is restarted each time the real-time clock reaches midnight.
To display the current schedule list, enter:
SCHED
To add a new command to the schedule list, enter:
SCHED,type,time{OFFSET,time},command
where: type = INTERVAL or TIME
time = hours:minutes:seconds
OFFSET,hh:mm:ss = time offset from specified timeframe (optional)
command = any MCC-545C command (with parameters)
NOTE
The scheduler ignores certain commands due to their interactive nature. The MESSAGE
command is currently the only one ignored
To remove command event(s) from the schedule list, enter:
SCHED,DEL,xxx
where: xxx = ALL (erases entire schedule)
or
= schedule list number (removes single scheduled event from the schedule list)