Meteor Communications Corporation MCC-545C, Эксплуатация и обслуживание, Страница: 53 / 88

OPERATIONS 4-17
MCC-545C PACKET DATA RADIO
12/2000
hh:mm:ss TXTMSG ACK name:sss, nnnn CHARS FROM name
When the destination MCC-545C receives a complete message, it displays the following
message:
hh:mm:ss MSG RECEIVED name:sss, xxxx CHARS
text………………………………
**end-of-message**
where “name:sss” is the message serial number.
Messages are deleted as they are displayed or printed unless they are being forwarded to further
destinations.
4.3.7 Examining MESSAGE STATUS
The status of all messages may be examined while they are still in the Tx Queue. (Note: once
an ETE is received for a message it is deleted from the queue).
To examine a message, enter:
SMS {,ID}
4.3.8 Examining and Revising Message Queues
There are two types of queues for transmitting and receiving messages:
QUEUE NAME DESCRIPTION
TXQ
(Transmit Queue)
This queue is used for transmitting all messages. There is
a separate transmit queue for each neighboring station in
the network. For example, if you enter a message for
DEST1 That message is placed in DEST1’s transmit
queue.
RXQ
(Receive Queue)
This queue is used for all received messages. There is a
separate receive queue for each neighboring station in the
network. For example, to examine message statistics from
NODE5, examine the receive queue from NODE5.
To examine the contents of either queue, type:
SHOW TXQ,ID or SHOW RXQ,ID
You must specify the queue by entering the station ID. For example, SHOW TXQ,006 prints
statistics for all messages being transmitted to station 006.