Meteor Communications Corporation MCC-545C, Эксплуатация и обслуживание, Страница: 69 / 88

OPERATIONS 4-33
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
LISTM {,nnnnn…} Display Remotes with burst monitor bit set (all Remotes
or given IDs up to 12). nnnnn = Station
ID
Master =
1 –
245
Remote = 256 -
4095
1 – 4095
LISTT {,nnnnn} Display Remotes with “Type” flag set (all Remotes or
given IDs up to 12) nnnnn = Station
ID
Master =
1 –
245
Remote = 256 -
4095
1 – 4095
†LOGOFF Used to disallow operator commands with automatic 10
minute timeout for LOS role and 60 minute timeout for
TRANSPOND role. Logs you off, disables ALL
following operator commands except LOGON ,
$PENTM , or SDATA .
† LOGON, password LOGON used to allow operator commands. To log onto
a unit, enter the LOGON command followed by the
current password. This will remain in effect for a timeout
period (10 or 60 minutes depending on operating mode),
or until you log off. Default = MCC-545C
password = 3-20
character
password
A-Z, 0-9, -
*LOS CHECKIN {,ii,rr} Select check-in interval (in seconds) and retry count for
LOS operation. ii = interval
rr = retry 1 – 65535
1 – 65535
MEM
Show usage of dynamic pool memory.