Meteor Communications Corporation MCC-545C, Эксплуатация и обслуживание, Страница: 60 / 88

OPERATIONS 4-24
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
†CORPAT,RX ,action
{,pppp...}
Define Receiver correlation patterns to recognize.
Pattern 1 is the default and is the only pattern recognized
if no others specified. Up to 16 pre-defined patterns are
recognized. action = ON –
define patterns
or
OFF – use only
default pattern
pppp = pattern
number; ALL
means
recognize all
patterns
1 – 8
†CORPAT,TX ,pppp
{, ALWAYS }
Define Transmitter correlation pattern to send. Pattern 1
is the default and is the only pattern recognized if no
other specified. Up to 16 pre-defined patterns may be
used. pppp = pattern
number
ALWAYS means
use specified
pattern instead
of received
pattern
1-- 8
CR10X Display CR10X configuration parameters
†CR10X,ACQMODE ,mo
de
Set CR10X acquisition mode - Get all reports since last
UPDT
mode =
ALL – get all
reports since last
update
CURRENT –
get only the
current data
report
LAST ,n – get
last “n” data
reports