8
OPERATION MANUAL
The electrical circuits of your machine are designed to allow operation
with maximum safety. The following precautions are available on the ma-
chine for enhanced safety.
There are three Emergency stop buttons (engaging type). They are found
on the foot switch, control unit, and on the front of the machine. Once the
buttons has been pressed to reset the emergency stop, the red button must
be rotated.
2.2. FEATURES OF THE MACHINE:
Foot pedal control
The foot pedal when pressed activates the beam and must be held in the de-
pressed position until the machine has completed its cut.
Release the foot pedal during the cutting operation and the blade will stop and
stay in that position. To make it return to the top of the stroke the foot pedal
must be pressed again and held until the cycle has been completed.
Main Controls
The main machine operating controls are located on the front of the
machine.
1
2
3
4
5
6
1 Power ON Light
2 Illuminated Start Button
3 Electrics OFF
4 Continuous or Single cut
5 Emergency Stop
6 Rear Safety Guard
Page 8
Instructions Manual for MG-440 (S924A)
07/02/2018
