Metallkraft ULMS 420, Инструкция по эксплуатации

Страница: 5 / 40

Safety
ULMS-Series | Version 2.04 5
These operating instructions specify the following per-
sonal qualifications for the different tasks:
Operating staff:
Operating staff has undergone an induction by the oper-
ator about the entrusted tasks and potential hazards re-
sulting from improper behaviour. Tasks which go beyond
normal operation may only be carried out by the operator
if they are listed in the operation manual and the opera-
tor has made him/herself familiar with them.
Qualified electrician
Due to the electrician's specialised training, know-how,
experience and knowledge of pertinent standards and
regulations the electrician is in a position to work on the
electrical systems, and autonomously identify and avoid
potential hazards.
Specialist staff:
As a result of specialist training, expertise, experience
and skills in terms of the relevant standards and regula-
tions, specialist staff is able to complete the tasks they
are entrusted with and independently identify hazards
and avert risks.
Manufacturer:
Certain work must be carried out by manufacturer spe-
cialist staff only. Other staff is not permitted to carry out
this work. Contact our customer service to have the work
carried out.
2.4 Personal protective equipment
Personal protective equipment is intended to protect the
health and safety of persons at work. Staff must wear the
personal protective equipment indicated in individual
sections of these operating instructions when carrying
out the different tasks on the machine.
The personal protective equipment is described in the
following section:
2.5 Safety data sheets
Safety data sheets for hazardous materials can be obtai-
ned from your specialist dealer or by phone: +49 (0)951/
96555-0. Specialist dealers can find safety data sheets
in the download area of the partner portal.
2.6 General safety precautions
Note the following:
- Keep the machine and its working environment al-
ways clean. Ensure adequate lighting.
- The Automatic light alloy metal-cutting saw must not
be altered in design and should not be used for pur-
poses other than those foreseen by the manufacturer.
- Never work under the influence of concentration dis-
turbing illnesses, fatigue, drugs, alcohol or medicines.
- Keep children and persons unfamiliar with the under-
floor Automatic light alloy metal-cutting saw away
from their working environment.
- Do not pull on the mains lead to pull the plug out of the
socket. Protect the cable from heat, oil and sharp edges.
- Disruptions that affect safety are eliminated immediately.
- Protect the Automatic light alloy metal-cutting saw
from moisture (risk of short circuit).
- Before using the Automatic light alloy metal-cutting
saw, make sure that no parts are damaged. Dam-
aged parts must be replaced immediately to avoid
any danger.
- Do not overload the Automatic light alloy metal-cutting
saw! You work better and safer in the specified perfor-
mance range. Use the correct saw blade! Make sure
that the saw blade is not damaged.
- Only use original spare parts and accessories to
avoid possible dangers and accident risks.
- The machine must be firmly installed to prevent acci-
dents.
Eye protection
Protective glasses protect the eyes against pro-
jected parts and splashes of liquid.
Hearing protection
Hearing protection protects the ears against hearing
damage caused by noise.
Respiratory protection
Respiratory protection serves to protect the respira-
tory tract and lungs against absorbing dust particles.
Use suitable Protective gloves
Protective gloves protect the hands from compo-
nents with sharp objects as well as friction, abrasion,
and deep-cut injuries.
Safety shoes
Safety shoes protect feet from pinching, falling parts
and slipping on slippery surfaces.
Protective clothing
Protective work clothing means tight-fitting clothing
with low tear resistance.