Metallkraft ULMS 420, Инструкция по эксплуатации

Страница: 3 / 40

Introduction
ULMS-Series | Version 2.04 3
1 Introduction
You have made an excellent choice in purchasing a
METALLKRAFT Automatic light alloy metal-cutting saw.
Carefully read the operating instructions prior to
commissioning.
They describe correct commissioning, intended use and
safe as well as efficient operation and maintenance of
the Automatic light alloy metal-cutting saw. The opera-
ting instructions form part of the Automatic light alloy me-
tal-cutting saw. Always keep them at the metal cutting
circular saw's location of use.
Please also observe the local accident prevention regu-
lations and general safety regulations for the use of the
Automatic light alloy metal-cutting saw. Figures in this
operation manual serve to provide a basic understanding
and may differ from the actual design.
1.1 Copyright
The contents of these instructions are protected by copy-
right and are the sole property of Stürmer Maschinen
GmbH. Their use is permitted within the scope of the use of
the underfloor light alloy circular saw. Any other use is not
permitted without the written approval of the manufacturer.
Passing on as well as duplication of this document, utili-
zation and communication of its contents are prohibited,
unless expressly permitted. Violations will result in liabi-
lity for damages. We register trademark, patent and de-
sign rights to protect our products, insofar as this is pos-
sible in individual cases. We emphatically oppose any
infringement of our intellectual property.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your machine or require any techni-
cal information. Your specialist retailer will be happy to
support you with specialist advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0951 96555-111
E-Mail: service@stuermer-maschinen.de
Spare parts orders:
Fax: 0951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
Please submit any information and experiences you
make during application of the machine as these may be
valuable for product improvements.
1.3 Disclaimer
All data in this operation manual has been compiled on
the basis of the state-of-the-art, valid standards and gui-
delines as well as our many years of expertise and expe-
rience.
The manufacturer shall not be liable for damage in the
following cases:
- Failure to comply with the operation manual,
- Unintended use
- Deployment of inexperienced staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the de-
scriptions and illustrations in this document as a result of
special variants, optional extras or recent, technical mo-
difications.
The obligations defined in the supply con-tract shall ap-
ply in addition to the general terms and con-ditions and
the manufacturer's general terms and condi-tions as well
as the statutory regulations valid at the time of the con-
clusion of the contract.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and reli-
able operation. The individual sections contain additio-
nal, task-specific safety information.
2.1 Legend of symbols
Safety instructions
Safety instructions in this operation manual have been
highlighted with symbols. Safety instructions are indi-ca-
ted by signal terms that express the degree of risk in-
volved.